Annoying Co-Workers

  • This message board permanently closed on June 30th, 2020 at 4PM EDT and is no longer accepting new members.

Ashcrash

Ashcrash

Well-Known Member
Jun 10, 2015
1,326
4,898
Wutsittoyu
kingricefan said:
Pics? ;;D Hope you are feeling better.
Click to expand...
OH GOD YOU KNOW IT.... right as a felt the vommit coming up.....I mean I had like two seconds because It was out of no where I thought OH GOD SELFIE!!!! WOOOOOOOO

11666098_10153133390433585_1983450980060880130_n.jpg

This has been a battle of heat for days blunthead has been telling me to stay hydrated but today I threw up whatever I tried to drink. grrrr
 
  • Like
Reactions: Cowboy, no bounce no play, Anduan Pirate Princess and 6 others
Neesy

Neesy

#1 fan (Annie Wilkes cousin) 1st cousin Mom's side
May 24, 2012
61,289
239,271
Winnipeg, Manitoba, Canada
Ashcrash said:
OH GOD YOU KNOW IT.... right as a felt the vommit coming up.....I mean I had like two seconds because It was out of no where I thought OH GOD SELFIE!!!! WOOOOOOOO

11666098_10153133390433585_1983450980060880130_n.jpg

This has been a battle of heat for days blunthead has been telling me to stay hydrated but today I threw up whatever I tried to drink. grrrr
Click to expand...
Drink more Gatorade?

Do you work in a factory type setting? That can be brutal in the summer.
 
  • Like
Reactions: Cowboy, no bounce no play, GNTLGNT and 5 others
Neesy

Neesy

#1 fan (Annie Wilkes cousin) 1st cousin Mom's side
May 24, 2012
61,289
239,271
Winnipeg, Manitoba, Canada
Ashcrash said:
YEP and yep

You are preachin to the blunthead converted lol. He just said this all to me. I think the problem is I waited a couple days to late. But I am trying to get my electrogadgetie things back in order.
Click to expand...
Electrolytes? (I heard Bud Lite is good, too, but stay away from the beers!) :unconscious::m_sneak::m_drink:Just kidding - hope you feel okay now.
 
  • Like
Reactions: Cowboy, no bounce no play, GNTLGNT and 4 others
not_nadine

not_nadine

Comfortably Roont
Nov 19, 2011
29,655
139,785
Behind you
Oh, forgot about this guy. This happened Thursday and Friday.

This is the same, 'do you know what you are looking at guy'. He is from QC. Comes up to me with a drawing - not even mine. Starts telling me about a note that is on it. And the difference between studs and rods. I say uh huh. Not my drawing. Takes me down to the shop, shows me drawing and the actual piece that came in. I say uh huh. Then I had enough. Pointed out that the drawing calls for TOE (threaded one end) and the drawing is correct, and they called out for slots or holes, so dwg is good, it is a standard drawing and these notes and changes are to take in the tolerances of the unit it has to fit up to.

Thought he was going to pat me on the head. He did take the time to pick a speck of lint off my sweater and told me it gets dirty down here.

Next day he comes over. (picture a strange Danny Devito) wants to know about my schooling.
Actually asked me if I ever went to school for this. huuuumph.

I was hired with my resume and portfolio and you are not my boss you azz, I am thinking.

I rattle off schools. NOW he is happy. He went to one of them.

'I am going to have to start looking at you differently!' We are alumni!

Jerk.
 
  • Like
Reactions: no bounce no play, Anduan Pirate Princess, blunthead and 7 others
Cowboy

Cowboy

Lesser-Known Member
Feb 17, 2007
11,053
5,963
Calla Bryn Sturgis
I work with Mr. Know It All. He will always top your story with one more sensational that he was involved in. To make it worse, if you are telling someone something, he comes running out of his office and barges in on the conversation, immediately outdoing whatever it was, or knowing more about than you do.
I usually start looking at his nose and rubbing my nose as if I'm trying to imply he has a friend dangling there....he will run off to the restroom to clean up.
 
  • Like
Reactions: carrie's younger brother, Lockdain, no bounce no play and 8 others
Neesy

Neesy

#1 fan (Annie Wilkes cousin) 1st cousin Mom's side
May 24, 2012
61,289
239,271
Winnipeg, Manitoba, Canada
not_nadine said:
Oh, forgot about this guy. This happened Thursday and Friday.

This is the same, 'do you know what you are looking at guy'. He is from QC. Comes up to me with a drawing - not even mine. Starts telling me about a note that is on it. And the difference between studs and rods. I say uh huh. Not my drawing. Takes me down to the shop, shows me drawing and the actual piece that came in. I say uh huh. Then I had enough. Pointed out that the drawing calls for TOE (threaded one end) and the drawing is correct, and they called out for slots or holes, so dwg is good, it is a standard drawing and these notes and changes are to take in the tolerances of the unit it has to fit up to.

Thought he was going to pat me on the head. He did take the time to pick a speck of lint off my sweater and told me it gets dirty down here.

Next day he comes over. (picture a strange Danny Devito) wants to know about my schooling.
Actually asked me if I ever went to school for this. huuuumph.

I was hired with my resume and portfolio and you are not my boss you azz, I am thinking.

I rattle off schools. NOW he is happy. He went to one of them.

'I am going to have to start looking at you differently!' We are alumni!

Jerk.
Click to expand...
Maybe he is sweet on you ;;D:facepalm::haha:
 
  • Like
Reactions: GNTLGNT, Cowboy, no bounce no play and 6 others
HollyGolightly

HollyGolightly

Well-Known Member
Sep 6, 2013
9,660
74,320
54
Heart of the South
not_nadine said:
Oh, forgot about this guy. This happened Thursday and Friday.

This is the same, 'do you know what you are looking at guy'. He is from QC. Comes up to me with a drawing - not even mine. Starts telling me about a note that is on it. And the difference between studs and rods. I say uh huh. Not my drawing. Takes me down to the shop, shows me drawing and the actual piece that came in. I say uh huh. Then I had enough. Pointed out that the drawing calls for TOE (threaded one end) and the drawing is correct, and they called out for slots or holes, so dwg is good, it is a standard drawing and these notes and changes are to take in the tolerances of the unit it has to fit up to.

Thought he was going to pat me on the head. He did take the time to pick a speck of lint off my sweater and told me it gets dirty down here.

Next day he comes over. (picture a strange Danny Devito) wants to know about my schooling.
Actually asked me if I ever went to school for this. huuuumph.

I was hired with my resume and portfolio and you are not my boss you azz, I am thinking.

I rattle off schools. NOW he is happy. He went to one of them.

'I am going to have to start looking at you differently!' We are alumni!

Jerk.
Click to expand...
sounds like he's got a crush on our nottie!
 
  • Like
Reactions: GNTLGNT, Cowboy, no bounce no play and 4 others
morgan

morgan

Well-Known Member
Jul 11, 2010
29,353
104,579
North Dakota
not_nadine said:
There is a salesguy that works way way across the big room. Talks and Talks loud on the phone and at break and uses the biggest words he knows for everything.

Wears sunglasses and talks about memos while holding a coffee cup outside. When everyone else is just goofing off - break time.
Click to expand...

(My computer just spazzed out, let me try again.)
 
  • Like
Reactions: HollyGolightly, GNTLGNT, Cowboy and 5 others
You must log in or register to reply here.
Top Bottom